(05-05-2018 19:41)phantom7 писал(а): Вау! Я такого не слышал. Электроны есть электроны и врядли они чтото изменяют в структуре метала. Да бог с ним пусть каждый останется при своём мнении.
What happens during break in?
Considerable changes occur in the cable during the break in process. Any gases that were trapped between the insulation and the conductors during manufacturing are dissipated. Additionally, the insulation material charges up. The diode effects of the conductor will be more pronounced after 168 hours of break in. During this time the cable takes on a direction.
